13x Molecular Sieve (HP)

Molecular sieve 13x is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 10 Angstrom and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove too large to fit type A crystal and is commonly used to separate nitrogen from oxygen.


Na86 (AlO2)86(SiO2) : XH2O


It is mainly used for refinement since it implements simultaneous adsorption for bi-molecule and tri-molecule and can be applied for liquefied and gaseous materials on the whole. Main adsorbing target are carbon dioxide, sulfuretted hydrogen and mercaptan including water and it can adsorb all the material whose molecular diameter is less than 10A. The main uses are as follows.
1. Air refining (removing CO2 and H2O)
2. Oxygen PSA (Pressure Swing Adsorption) process

Technical Parameter:

Item Specification
Diameter (mm) 0.5-1.0 1.6-2.5
Bulk Density (g/ml, ≥) 0.62 0.60
Abrasion (%, ≤) 0.1 0.1
Crush Strength (N, ≥) / 20.0
CO2-Adsorption (wt%≥) 19.0 19.5
H2O-Adsorption (wt%≥) 28.5 28.5
LOI(575°C%≤) 1.0 1.0


25 kg. cartoon drum, 140 kg. steel drum.

Hand & Storage Recommendation

It should be handled to avoid generation of dusty conditions at the workplace. Storage in a dry warehouse is recommended. Open packages should be released to prevent contamination and adsorption of water or other gases and vapors.